Output power capacity:
1.98kWatts / 2.2kVA

Output Connections:
(2) IEC Jumpers (Battery Backup)
(8) IEC 320 C13 (Battery Backup)
(2) IEC 60320 C19 (Battery Backup)
(2) IEC 320 C19 (Battery Backup)
(8) IEC 60320 C13 (Battery Backup)

Nominal Output Voltage:
230V

Nominal Input Voltage:
230V

Input Connections:
BS1363A British, IEC 60320 C20, Schuko CEE 7 / EU1-16P

Cord Length:
2.4meters

APC Smart-UPS On-Line, 2200VA, Tower, 230V, 8x C13+2x C19 IEC outlets, SmartSlot, Extended runtime, W/O rail kit
High density, double-conversion on-line power protection with scalable runtime.

ECO Mode:
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection.

LCD graphics display:
Text and mimic diagrams that display modes of operation, system parameters and alarms.

Rack/Tower convertible:
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Scalable runtime
Allows additional run time to be quickly added as needed.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.

Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.

Cold-start capable
Provides temporary battery power when the utility power is out.

Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.ed.