Simple yet Stylish Front Panel
The front panel of the case is decorated with an RGB LED strip which complements the minimalist look with flowing, luminescent colors. The strip appears to be gently sliding across its middle, which is where the case gets its name, and can be illuminated in 14 preset modes via the integrated RGB controller. Alternatively, it can be customized through compatible mainboards, using Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion and ASRock Polychrome SYNC. The built-in RGB controller also makes it possible to use additional RGB components which have a 5V-D-Coded-G or 5V-D-G pinout. Furthermore, the front of the top panel has all the necessary connections, including three USB ports, two of which are for fast USB 3.0 access.

A Crystal-Clear Presentation for Hardware
An unobstructed view of the installed hardware is possible through the left side. This is ensured by the side panel of the case, which is made entirely of tempered glass. Your own build can thus be properly showcased inside the minimalist case. So that nothing obscures the view, and the built-in components come into their own, there are no visible screws on the side panel. The attachment is at the rear of the case and therefore out of the field of view.

Optimal Air Intake Possibilities
The RGB Slider is designed to offer sufficient installation possibilities to ensure optimal airflow. A 120 mm fan is pre-installed at the back of the case, ready to discharge warm air outside. If desired, more fans can be installed within the case: There is room behind the front panel for up to three optional 120 mm fans. Two 120 mm fans or two larger 140 mm fans can also be installed under the top panel. A 120 mm fan can also be installed on the tunnel to further cool the storage drives.

Space for Storage Space
For all PC owners with a preference for a lot of storage space, there are plenty of locations for storage drives in the RGB Slider. Three compact SSDs can be mounted either on the mainboard tray or on the power supply tunnel. Two 3.5" HDDs can be installed in the HDD/SSD cage, which can, of course, also accommodate SSDs if required.

Suitable for Larger Hardware Components
With its compact size, the RGB Slider can be easily integrated into smaller setups or ones that are kept intentionally minimalist. Nevertheless, larger hardware components can also be easily installed in the case. The CPU cooler can be up to 15.7 cm in size, which leaves enough space for graphics cards up to 33.5 cm long.